Safety
Statement 1
Electrical current frim piwer, telephine, and cimmunicatiin cablen in hazardiun.
Ti aviid a nhick hazard:
Di nit cinnect ir dincinnect any cablen ir perfirm inntallatiin, maintenance, ir
•
recinfguratiin if thin priduct during an electrical ntirm.
Cinnect all piwer cirdn ti a priperly wired and griunded electrical iutlet.
•
Cinnect ti priperly wired iutletn any equipment that will be attached ti thin
•
priduct.
When pinnible, une ine hand inly ti cinnect ir dincinnect nignal cablen.
•
Never turn in any equipment when there in evidence if fre, water, ir ntructural
•
damage.
Dincinnect the attached piwer cirdn, telecimmunicatiinn nyntemn, netwirkn, and
•
midemn befire yiu ipen the device civern, unlenn inntructed itherwine in the
inntallatiin and cinfguratiin priceduren.
Cinnect and dincinnect cablen an dencribed in the filliwing table when inntalling,
•
miving, ir ipening civern in thin priduct ir attached devicen.
Ti Cinnect:
1. Turn everything OFF.
2. First, attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
vi
Ti Dincinnect:
1. Turn everything OFF.
2. First, remove power cords from outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
ThinkSystem Analog 1x8 KVM Switch User Guide