Displays - ACP RC Series Owner's Manual

Displays

STYLE 2
Cooking Displays
STYLE 2
ready
OO:OO
mw: 5o%
ITEM-o5
Stage 1
Quantity = 2
Programming Displays
STYLE 2
Enter Program
to Add/Review:
Stage 1
The display is used for many different models of microwaves.
Depending on the model, certain words or symbols may never be highlighted or become visible.
Example Cooking Displays
Manual Stage:1
OO:5O MW:1OO%
MANUAL COOKING
Item-O5 Stage:1
O1:23 MW:5O%
PREPROGRAMMED ITEM
©2020 ACP, Inc.
Cedar Rapids, IA 52404
DESCRIPTION
"Ready" Displays when oven control will accept entries
Displays cooking time. If stage cooking is programmed, total cooking time is displayed.
"MW __%" displays the current microwave power level. 100% is the highest setting, and 0% is lowest (no
microwave energy used).
"ITEM-__" displays the single or double digit entry location of a programmed cooking sequence when using a
programmed pad.
"STAGE _"displays the stage number (1 through 4) the oven is at in the cooking sequence.
"QUANTITY = _" displays the number of portions (1-8) selected for Quantity Keypad cooking.
DESCRIPTION
Displays when oven is in programming mode.
Displays stage number during cooking or when programming a specific cooking stage. Stage number
(1 through 4) indicates the stage that is being used.
PROGRAM PAUSED Display
MID - CYCLE COOKING PAUSE
The 'Mid-Cycle Cooking Pause' feature is designed to stop
halfway through a recipe cook sequence. This pause can be
used to add ingredients; check cooking progress; or stir/rotate
food during the cooking cycle.
During a mid-cycle cooking pause, the oven beeps
continuously and PROGRAM PAUSED displays until the oven
door is opened and closed again.
To continue the cooking cycle, press START/OK keypad.
Page 18 of 24
Part No. 20072103
Original Instructions