Manual Cook Mode - ACP RC Series Owner's Manual

Manual Cook Mode

STYLE 1
Manual Cook Screens
MANUAL COOK ENTRY
Displays while operator is entering cook settings in Manual Cook mode.
Active editable field is highlighted in red.
To navigate to editable fields: Press UP/DOWN (▲▼) keypads.
MANUAL COOK ENTRY
1 cooking stage used.
Stage 1 Cook Time field is
highlighted/editable.
Manual Cooking
Allows operator to heat without changing the preset recipe keypads.
From READY or DOOR OPEN screen:
1. Open oven door, place food in oven, and close door.
• READY screen will display.
2. Press MENU (☰) keypad.
• If prompted, enter PIN Code and press START/OK keypad.
• MENU screen will display.
3. Press number "2" keypad to access "Manual Cook".
• MANUAL COOK ENTRY screen will display.
To navigate to editable fields: Press UP/DOWN (▲▼) keypads.
4.
• Active editable field is highlighted in red.
• Editable fields include:
◦ Cook Time (per stage)
◦ %Microwave Power Level (per stage)
◦ Add a Stage
Press number keypads to enter desired settings per field.
5.
To add additional cooking stages: Press DOWN (▼) keypad until "+ STAGE" is
6.
highlighted.
• A new row of Cook Time and %Microwave Power Level fields will display
• Repeat steps 4–6 for each additional stage.
7. Press START/OK keypad to begin cooking.
• Oven operates and display counts down cooking time.
8. At the end of the cooking cycle, the oven beeps. Carefully remove food from oven.
©2020 ACP, Inc.
Cedar Rapids, IA 52404
"Manual Cook" Editable Fields:
(A) COOK TIME ( PER STAGE )
(B) %MICROWAVE POWER LEVEL ( PER STAGE )
(C) ADD A STAGE
MANUAL COOK ENTRY
3 cooking stages used.
Stage 3 Power Level field is
highlighted/editable.
Page 10 of 24
Combined total cook time cannot exceed 60:00.
Percent microwave power from 0-100% in 10% increments
(keypad "0" = 0%, keypad "1"=10%, keypad "2"=20%,etc.)
For 100% power level, press any number keypad twice.
Up to four stages can be entered.
1
3
7
2
6
8
Part No. 20072103
Original Instructions