Chain Dialing - Uniden EXI3246 Series Owner's Manual

Memory dialing from Talk Mode
1) Press the talk/flash key. ¨
the volume setting appears.
2) Press the mem key.
3) Press the vol/ring/
(01 - 20) to select the memory location of the desired
phone number. If you press the select key, the number
is dialed.
4) To hang up, press the end key.

Chain Dialing

The memory locations on the handset are not limited to phone numbers. You can
also store a group of numbers (up to 20 digits) that you need to enter once your
call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank, and
are prompted to enter the account number, press the mem key and select the
location number where the special number has been stored. Then press the select
key.
Store your special number with an identifying name. (Refer to "Storing Phone
Numbers and Names" on page 23.)
www.uniden.com
¨ and
or vol/ring/ key, or enter a number
M E M O R Y D I A L I N G [ 27 ]