Viewing The Caller Id Message List - Uniden EXI3246 Series Owner's Manual

• In Caller ID operation, if
no key is pressed for
more than 30 seconds,
an error tone sounds and
the telephone returns to
standby mode.
• If a call comes in via a
telephone system that
does not offer Caller ID
service, no information
is stored.
• Each message can be
up to 15 characters for
the phone number and
the name.
• The number of calls
from the same Caller ID
appears next to the
received time. Once you
view the new message,
the number will be
cleared and disappear.
[ 34 ] C A L L E R I D F E A T U R E S
2) When you pick up the phone, the display changes to ¨
is set to on.)
Data errors appear as ¨

Viewing the Caller ID Message List

The Caller ID list stores information for up to 30 incoming calls - even
unanswered calls.
1) Press the cid/menu key in the standby mode.
The summary screen appears. The screen shows the number
of new messages and total messages.
2) Press the vol/ring/
latest or oldest Caller ID message.
3) Press the vol/ring/
press the vol/ring/
4) Press the end key to returns to standby mode.
¨.
or vol/ring/ key to display the
key to see the next message. Or
key to see the previous message.
¨. (AutoTalk feature
www.uniden.com