Uniden EXI3246 Series Owner's Manual page 29

7) Use the /tone/
*
number key to edit the phone number. The phone number
cannot exceed 20 digits. (See page 24.)
If you don´t want to change the phone number, skip this step.
8) Press the mem or select key. If you changed either
name or phone number, a confirmation display shows
up. If it is correct, press the vol/ring/
move the pointer to ¨
You hear a confirmation tone, and the following
screen appears. The memory storage is complete.
For example, if you store a name and number into
memory location number 01, the display shows
¨
memory screen is displayed.
9) Press the end key to returns to standby mode.
www.uniden.com
, #/ , redial/p, delete/ch, or any
¨ and press the select key.
¨. After about 2 seconds, Select
key to
M E M O R Y D I A L I N G [ 29 ]