Quick Reference Guide - Uniden EXI3246 Series Owner's Manual

Step 1 Checking the Package Contents
Make sure you have received the following items in
the package. If any of these items are missing or
damaged, contact the Uniden Parts Department.
• Base unit
• Handset Uniden Parts Department at
• AC adapter (800) 554-3988
Hours: M-F 8:00 a.m. to
• Rechargeable battery
5:00 p.m. CST.
• Telephone cord
We can also be reached on
• Beltclip
the web at www.uniden.com
• This owner's manual
Step 2 Install and Charge the Handset Battery
TO INSTALL THE HANDSET BATTERY
A
Remove the cover.
Connect the battery pack
B
connector with the
correct polarity.
C
Replace the cover.
www.uniden.com
Plug the AC adapter cord into the base
D
unit and then into a 120V AC outlet.
Place the handset in the base and charge
E
continuously for 15 - 20 hours before using
the phone.
Step 3 Connect to Phone Line
When the handset battery pack is fully charged,
after 15-20 hours of charging, plug the telephone
cord into the base unit and then into a telephone
wall jack.
Your phone is set for tone dialing. If your local
network requires pulse dialing, please see
"Choosing the dialing mode" on page 17.
Step 4 Setting Display Options
Note: Three Caller ID options are available: AutoTalk,
Caller ID on Call Waiting (CIDCW), and Area Code.
TO SET CALLER ID, LANGUAGE AND DIALING OPTIONS
Press and hold the cid/menu key in the
A
standby mode.
Press the vol/ring/
B
to move the pointer to an option.
Press the select key to change the option
C
setting.
Press the end key to exit, and return the
D
handset to the base.
OPTIONS INCLUDE
A
Auto Talk On/Off
CIDCW On/Off
B
(Caller id on call waiting)
C
Area Code Enter/Remove
D
Dial Pulse/Tone
E
Language English/French/Spanish
Q U I C K R E F E R E N C E G U I D E
or vol/ring/ key
[ 3 ]