Uniden EXI3246 Series Owner's Manual page 16

Entering Your Area Code
If you enter a 3-digit area code number in the
code does not appear in Caller ID messages. Do not program this option if your
calling area requires 10-digit dialing. When reviewing Caller ID messages, you will
see only the local seven digit number. For calls received from outside your local area
code, you will see a full 10-digit number.
1) When the phone is in the standby mode, press and hold the
2) Press the vol/ring/
3) Press the select key.
4) Use the number (0 - 9) or delete/ch key to enter the
5) Press the select key. A confirmation tone sounds and the displayed area code is
6) Press the end key or return the handset to the base unit to complete the setting.
[ 16 ] G E T T I N G S T A R T E D
cid/menu key. The Caller ID setting screen appears.
3-digit area code.
entered.
The handset returns to standby mode.
When the area code has already been stored in memory, the stored
area code will be displayed. To change it, use the
and number keys to enter the new area code.
Then press the select key. A confirmation tone sounds. To
complete the setting, press the end key or return the handset to
the base unit.
key twice to select ¨
option, your local area
¨.
delete/ch key
www.uniden.com