Mounting The Base Unit On A Wall - Uniden EXI3246 Series Owner's Manual

Mounting the Base Unit on a Wall

Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Plug the AC adapter into the DC IN 9V jack.
2) Wrap the AC adapter cord inside the molded
wiring channel as shown.
3) Plug the AC adapter into a standard 120V AC
wall outlet.
4) Plug the telephone line cord into the TEL LINE
jack. Wrap the cord inside the molded wiring
channel as shown.
5) Plug the telephone line cord into the telephone
outlet.
6) Raise the antenna to a vertical position.
7) Align the mounting slots on the base with the
mounting posts on the wall. Then push in and down
until the phone is firmly seated.
www.uniden.com
DO NOT use an AC
outlet controlled by
a wall switch.
G E T T I N G S T A R T E D [ 13 ]