Download Print this page

Pinnacle Skillion Series Assembly Instructions Manual page 2

Gardenshed, 3.0w x 1.5d x 2.1hm, double sliding door

Hide thumbs Also See for Skillion Series:

GardenShed

3.0 x 1.5 x 2.1m

Build your garden shed in 7 easy steps!

Step 1: Check all parts against the component list

Step 2: Assemble the rear wall panels

Step 3: Assemble the side wall panels

Step 4: Assemble the roof panels

Step 5: Assemble the front doors

Step 6: Assemble the front wall panel

Step 7: Fit the panels together

IMPORTANT: It is recommended that your new shed is secured to a concrete slab as per the speciﬁcations in this manual.

Concrete slab: Please ensure that your site is level. It is recommended that your slab is 100mm thick and you use builder's

plastic and F52 reinforcing mesh. We recommend that you make your slab approximately 100mm bigger than the base

dimensions of your shed. This will allow for a 50mm edge around your shed. We recommend that you slope the 50mm edges

downward by 10mm so that rain water can drain away from your shed.