Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Pinnacle Manuals
  4. Outdoor Storage
  5. Skillion Series
  6. Assembly instructions manual

Pinnacle Skillion Series Assembly Instructions Manual

Gardenshed, 3.0w x 1.5d x 2.1hm, double sliding door
Hide thumbs Also See for Skillion Series:

Advertisement

Quick Links

Download this manual
GardenSHED
3.0W x 1.5D x 2.1Hm | Double Sliding Door
3.0m Skillion Series
Assembly instructions
Congratulations on purchasing your new Pinnacle Garden Shed. Before assembling, we
recommend you read the instructions thoroughly. Your new shed comes with pre-drilled holes to
make assembly quicker. We recommend you assemble the shed using a trestle table or sawhorses
and planks. This will ensure that you are working off the ground and make it easier for you.
Assembly is a two-person job and should not be attempted in windy conditions.
Tools required: Drill, measuring tape, phillips-head screw driver, rivet gun, rubber mallet, sturdy ladder, shifting spanner, 2 saw horses,
3mm steel drill bit, 4mm steel drill bit and a 10mm masonry drill bit.

Advertisement

loading

Related Manuals for Pinnacle Skillion Series

Summary of Contents for Pinnacle Skillion Series

  • Page 1 3.0m Skillion Series Assembly instructions Congratulations on purchasing your new Pinnacle Garden Shed. Before assembling, we recommend you read the instructions thoroughly. Your new shed comes with pre-drilled holes to make assembly quicker. We recommend you assemble the shed using a trestle table or sawhorses and planks.
  • Page 2 GardenShed 3.0 x 1.5 x 2.1m Build your garden shed in 7 easy steps! Step 1: Check all parts against the component list Step 2: Assemble the rear wall panels Step 3: Assemble the side wall panels Step 4: Assemble the roof panels Step 5: Assemble the front doors Step 6: Assemble the front wall panel Step 7: Fit the panels together...
  • Page 3 Step 1: Check all parts against the component list Lay out all parts with number facing outwards and check off against parts list. Part Picture Description Component Location QTY BOX Check Sheet Size: 2057x770mm Rear wall Sheet Size: 1977-2057x770mm Side wall Sheet Size: 1977-2057x770mm Side wall...
  • Page 4 GardenShed 3.0 x 1.5 x 2.1m Part Picture Description Component Location QTY BOX Check Channel Channel 768mm Door Jamb Length: 1853mm Door Brace Length: 1075mm Door Channel Length: 1494mm Roof Channel Length: 1494mm Roof Channel Length: 1494mm Rear wall Channel Length: 1494mm Rear wall Channel...
  • Page 5 Part Picture Description Component Location QTY BOX Check Channel Length: 1494mm Front Channel Length: 1514mm Front Channel Length: 1508mm Side wall Channel Length: 1516mm Side wall Channel Length: 1898mm Front Channel Length: 1401mm Side wall SC05 Channel Length: 1440mm Rear wall SC12 Channel Length: 1440mm...
  • Page 6 GardenShed 3.0 x 1.5 x 2.1m Part Picture Description Component Location QTY BOX Check Jamb Length: 1898mm Corner Jamb Length: 1898mm Corner Jamb Length: 2055mm Corner Jamb Length: 2055mm Corner Length: 1601mm Roof Joining Brace Door brace Channel Rear wall Length: 188mm connector / roof...
  • Page 7 Qty checking date: ____ / ____ / _____ Qty checking personal badge number: _______________ Signature: _________________________________________ In the unlikely event that you find you are missing a part, please contact Pinnacle on 1800 349 776. A copy of proof of purchase may be requested.
  • Page 8 GardenShed 3.0 x 1.5 x 2.1m Garden shed overview: SS06 SC05 SC13 SS06 SC12 SC05 SC29 SC30 SC30...
  • Page 9 Step 2: Assemble the rear wall panels You will find it easier to assemble your shed using sawhorses with timber studs attached (timber needs to be the same length as the shed (3.0m) or alternatively, a trestle table. Place 4 x part 6A (Sheet) on your worktable and then position parts 27I, 27H (top channel) and parts 27C, 27D (bottom channel) to the sheeting by tapping (diagram A) or sliding them into place (diagram B).
  • Page 10 GardenShed 3.0 x 1.5 x 2.1m RIDGES FACING UP Tip: If panel and screw holes do not line up, try pulling panel to match up holes.
  • Page 11 Step 2: Assemble the rear wall panels (continued) Now fix parts SC13 and SC12 (mid wall channels) joined by mid wall channel connector to the sheeting with self-tapping screws. Please note that the groove should face downwards. Fix other channels with self-tapping screws. TIP (before applying part 66 (channel connectors)): to help panel and screw holes to line up, fasten screws one at a time from one side of the wall to the other and pull panel away from screw each time to match up holes.
  • Page 12 GardenShed 3.0 x 1.5 x 2.1m Step 3: Assemble the side wall panels Place parts 2D and 7A (sheeting) on your worktable and fix part 25 (top channel) and part 20A (bottom channel) to the sheeting by tapping or sliding the channels in. Make sure the small lip of the channel is always facing out. This ensures rainwater cannot build up inside your shed.
  • Page 13 Repeat same step for the other side wall as per the diagram below. ROOF TOP EDGE SC05...
  • Page 14 GardenShed 3.0 x 1.5 x 2.1m Step 4: Assemble the roof panels Place 4 x part 8 (sheeting) on your worktable and fix 2 x parts 27A and 27B (channel) to the sheeting by tapping or sliding the channels in. Make sure the small lip of the channel is always facing out. This ensures rainwater cannot build up inside your shed. Please note: the groove should face downwards.
  • Page 15 Step 5: Assemble the front doors Place part 5A (door sheet) on the worktable. Fit 2 x part 21P (channel) to the top and bottom of the sheet and parts SC29, SC30 (channels) to the side of the door panel. Fix these channels with the provided 3.0 x 10mm rivets as per the diagrams below. SC30 SC29 Fix with 3.0x10mm rivets...
  • Page 16 GardenShed 3.0 x 1.5 x 2.1m Now repeat the same step for the other door as per the diagram below. ROOF TOP EDGE RIDGES FACING UP SC30 Fix with 3.0x10mm rivets...
  • Page 17 Once channels are fixed to both doors, align 2 x part U4 (brace) and part W (joining brace) with holes on the back of each door and position temporarily with some tape or simply hold in place. ROOF TOP EDGE RIDGES FACING DOWN 5A / 5F BACK...
  • Page 18 GardenShed 3.0 x 1.5 x 2.1m Turn door over with bracing still aligned with holes (make sure the ridges of the door are facing up) and fix the bracing with 3.0 x 10mm rivets through the front of the panel. Then turn door over and insert plastic stoppers at the ends of braces as shown below. FRONT RIDGES FACING UP Fix with 3.0x10mm rivets...
  • Page 19 Assemble the front wall panels Step 6: Place 2 x part SS06 (sheet) onto your worktable and fix 2 x part 22E (channel) to the inside edges of the sheeting with self-tapping screws provided as per the diagram below. Please note: All screws marked with a cross should not be fixed at this stage. ROOF TOP EDGE SS06 SS06...
  • Page 20 GardenShed 3.0 x 1.5 x 2.1m Fix parts 27R, 27Q, C26 (top channels) and parts 27S, 27T, and C26 (bottom channels) using self-tapping screws. Please note: for parts 27R, 27Q, 27S and 27T the small lip should be facing out to stop water building up and leaking into shed. ROOF TOP EDGE RIDGES FACING UP...
  • Page 21 Once the top and bottom channels are fixed position parts O2, O1 (top track) and O3, O4 (bottom track) and fix with the provided self tapping screws. Attach part 66A (track connector) on the top and bottom tracks to enhance strength. Note: All screws marked with a cross should not be fixed at this stage.
  • Page 22 GardenShed 3.0 x 1.5 x 2.1m Position the doors and ensure the top and bottom channel engage the tracks as you slide them on as per the diagram below. Once doors are sliding freely on the tracks position the doors in a closed position and install parts C4 (hasp & staple) with the provided 4.0 x 10mm rivets.
  • Page 23 Fit the panels together. Step 7: Attach the two side walls to the back wall followed by the front wall. Fix all of these components together using the provided self- tapping screws. When attaching the wall panels together also fix parts Z21, Z22, Z44 and Z19 (jamb) to each corner using the provided self-tapping screws as per diagram below.
  • Page 24 GardenShed 3.0 x 1.5 x 2.1m Now that the 4 wall panels are fixed together, position the roof in place and fix with the provided self tapping screws. Before fixing the roof to the side walls ensure 2 x part 51 (lip) are positioned and fixed. Strengthen your mid wall brace by applying part 72 (mid wall brace bracket) to each rear corner.
  • Page 25 Apply the left and right channel safety covers to part SC05 for safety. Also apply the self-tapper covers to the screw ends visible in walls on the inside of the shed. SC05 SC05...
  • Page 26 GardenShed 3.0 x 1.5 x 2.1m Warranty statement: This warranty against defects is given by: Pinnacle Hardware Business Address: 28 Hudson Court, Keysborough VIC 3173 1800 349 776 Email: support@pinnacle.net.au New Zealand customers please contact: HARCO (Harkness & Young Ltd) Ph: 09 276 4071 Email: sales@harknessyoung.co.nz...
  • Page 27 IMPORTANT 1. Manufacturer’s Disclosure This warranty against defects shall not apply in the following situations: A) Where the product is not assembled in accordance with the instructions provided in the product kit. B) Where the product is used to store corrosive materials such as fertilizer, chlorine etc; C) Where the damage to the product is caused by storms.