Advertisement
GardenShed
3.0 x 1.5 x 2.1m
Step 4:
Assemble the roof panels
Place 4 x part 8 (sheeting) on your worktable and fix 2 x parts 27A and 27B (channel) to the sheeting by tapping or sliding the
channels in. Make sure the small lip of the channel is always facing out. This ensures rainwater cannot build up inside your shed.
Please note: the groove should face downwards. TIP (before applying part 66 connectors): to help panel and screw holes to line
up, fasten screws one at a time from one side of the wall to the other and pull panel away from screw each time to match up holes.
NOTE: Screws are applied to both sides of the connectors. All screws marked with a cross should not be fixed at this stage.
8
8
8
8
66
27A
27B
27B
66
27A
14
Advertisement
