Advertisement
GardenShed
3.0 x 1.5 x 2.1m
Step 3:
Assemble the side wall panels
Place parts 2D and 7A (sheeting) on your worktable and fix part 25 (top channel) and part 20A (bottom channel) to the sheeting by
tapping or sliding the channels in. Make sure the small lip of the channel is always facing out. This ensures rainwater cannot build up
inside your shed. Make sure part 25 is used as top side channel. Now fix part SC05 (mid wall channels) to the sheeting with self-
tapping screws. Please note: the groove should face downwards. NOTE: Screws are applied to both sides of the connectors. All
screws marked with a cross should not be fixed at this stage.
7A
2D
ROOF TOP EDGE
RIDGES FACING UP
25
SC05
20A
12
Advertisement
