Advertisement
Step 2:
Assemble the rear wall panels (continued)
Now fix parts SC13 and SC12 (mid wall channels) joined by mid wall channel connector to the sheeting with self-tapping screws.
Please note that the groove should face downwards. Fix other channels with self-tapping screws. TIP (before applying part 66 (channel
connectors)): to help panel and screw holes to line up, fasten screws one at a time from one side of the wall to the other and pull
panel away from screw each time to match up holes. Apply part 66 (channel connector) on top and bottom channels to enhance the
strength. NOTE: Screws are applied to both sides of the connectors. All screws marked with a cross should not be fixed at this stage.
ROOF TOP EDGE
66
SC12
SC13
66
66
ROOF TOP EDGE
27I
SC13
27H
27C
27D
SC12
Mid wall channel
connector
11
Advertisement
