Resetting And Registering Handsets; Registering A Handset - Uniden XDECT SSE27 series Owner's Manual

Table of Contents

Advertisement

your DSL service might have left some filters for you; if not, call your DSL
provider or look in any electronics store.
Plug the DSL filter into the telephone wall jack and then plug your phone's
base into the filter. Make a test call to make sure the noise is gone.

resetting and registering Handsets

If you are having trouble with a cordless handset or if you want to replace
one, you need to clear the registration information from the base and the
handset:
Do you have the base the handset is registered to?
1.
Press and hold
until the System Reset menu
(#)
appears (about 5 seconds).
2.
Select
Deregister HS. The display
lists all registered handsets.
3.
Select the handset you want to reset.
4.
When the phone asks you to confirm,
select Yes. The handset clears its
information from the base and deletes
its own link to the base.
When you reset a handset (or if you purchase a new one), that handset
displays a Handset Not Registered message. If you see this message on
a handset, you need to register it to a base before you can use it.

Registering a handset

1)
On the base, open the menu and select
display should say Handset Registering.
2)
On the handset you want to register, press and hold
handset display says Handset Registering (about 2 seconds).
3)
In about 30 seconds, the handset display should say
Complete. Press
If...
-
you don't hear a dial tone
-
the display says
To register a handset to a different base, see the section "Expanding
Your Phone" in the user's guide for the other base.
Yes
and
FLASH/ExIT
HASH
and make sure you get a dial tone.
TAlk
Registration Failed
1.
Press and hold
until the System Reset
HASH (#)
menu appears (about 5 seconds).
2.
Select
Base Unavailable.
3.
When the phone asks you to
confirm, select Yes. The handset
deletes its own link without
contacting the base.
Register Handset. The
Try...
Making sure the handset is fully
charged, then start over at step 1.
No
and
FLASH/ExIT
until the
HASH (#)
Registration
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents