Step 1.
Remove four screws.
Figure 30. Remove four screws
Step 2.
Turn over the computer and then remove the strip cover.
Figure 31. Remove the strip cover
Go to
https://support.lenovo.com/partslookup
part:
Strip cover
Remove the LCD module
Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the heat sink" on page 34
"Remove the fan" on page 35
"Remove the strip cover" on page 42
Step 1.
Disconnect the EDP cable from the system board and then remove four screws.
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
43