Quick Reference Guide - Uniden DCT5260 Owner's Manual

Step 1 Charging the Batteries
INSTALL THE AA BATTERIES
Remove the cover.
Install the batteries,
observing the correct
+ - polarity.
Replace the cover.
PLUG INTO AC POWER
Plug the AC adapter cord into the base unit and
then to a 120V AC outlet.
Place the handset in the base.
You must charge the batteries continuously
Note:
for 17-20 hours before using the phone.
Step 2 Connecting
CONNECT TO A PHONE LINE
When the handset batteries are fully charged, plug the
telephone cord into the base unit and then into a
telephone wall jack.
Your phone is set for tone dialing. If your local network
requires pulse dialing, please see "Setting the Dial
Mode" on page 24.
Q U I C K R E F E R E N C E G U I D E
Step 3 Using the Phone
SELECT CALLER ID OPTIONS
Press the soft key in the standby mode.
MENU
volume/ L M
Press or to select "
", then the soft key.
OK
volume/ L M
Press or to select "
then the soft key.
OK
volume/ L M
Press or to select "
", "
or " ", then the
soft key.
CHOOSE THE LANGUAGE
Press the soft key in the standby mode.
MENU
volume/ L M
Press or to select "
", then the soft key.
OK
volume/ L M
Press or to select
" ", then the soft key.
OK
volume/ L M
Press or to choose a Language,
then the soft key.
OK
",
",
OK
[ 5 ]