Using One Touch Voice Mail Access - Uniden DCT5260 Owner's Manual

Using One Touch Voice Mail Access

You must subscribe
to voice mail service
from your telephone
company in order to
use this feature. The
voice mail service
company will
provide you with
the access number.
[ 32 ] B A S I C S
If you subscribe to voice mail service, you can use your phone to access your voice
mailbox. The voice mail LED flashes whenever you have messages waiting in your
voice mailbox. Just program the handset with your access number and you can get
your messages at the touch of a button. (The voice mail service provider will supply
you with the access number. This number may be simply a phone number. Refer to
the provider's literature.)
• To program or delete your Voice Mail Access Number
Dialing your Voice Mail Service
Once you've programmed your personal access number, you can dial your
mailbox with the touch of a button. When you have messages, simply pick
up the handset and press the
access number or it has been deleted, when you press the
"
you will hear a beep. The phone returns to the standby mode.
Voice Mail Access
The voice mail LED on the handset is designed to work with your voice mail
service provided by your local telephone company. The LED flashes when you
have new incoming messages in the voice mail service.
You may need to occasionally reset the indicators if they remain On after
you've retrieved your messages. To reset the indicators, when the phone is in
the standby mode press and hold find handset on the base until the
paging sound stops (about 5 seconds).
soft key. If you have not entered the
" appears and
e e See page 21.
soft key,