Symptom
Severe noise interference.
The Caller ID does not display.
Voice Message Indication
does not work.
You cannot register the
handset at the base.
The handset doesn't communicate • Remove the base ID (see "Replacing the Base Setting" on page 25)
with the other handsets.
An extra handset can't join
the conversation.
You cannot make an intercom
call with other handset.
If you still have a problem.
• Keep the handset away from microwave ovens, computers,
remote control toys, wireless microphones, alarm systems, intercoms,
room monitors, fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID
service is current.
• Contact your local telephone company to make sure that your
telephone receives FSK message signaling.
• Charge the batteries for 17-20 hours.
• Remove the base ID (see "Replacing the Base Setting" on page 25)
and register the handset (see "Register the Handset" on page 47).
and register the handset (see "Register the Handset" on page 47).
• Make sure that you have registered all handsets.
• Make sure there are not 2 handsets already using the 3-way
conference feature.
• Make sure that the receiving handset is not in use.
• Call our customer hotline at 1-800-297-1023.
Suggestion
T R O U B L E S H O O T I N G
[ 55 ]