General Information - Uniden DCT5260 Owner's Manual

General Information

The phone complies with FCC Parts 15 and 68. Operating temperature: 0 ºC to +50 ºC (+32 ºF to +122 ºF)
AC Adapter Information
AC Adapter part number:
Input Voltage:
Output Voltage:
Battery Information
Battery part number:
Capacity:
Battery use time (per charge) from fully charged:
Talk mode duration (normal or DirectLink mode)
Standby mode duration
If the handset is left off of the cradle, the actual Talk mode duration will be reduced
respective to the amount of time the handset is off the cradle.
Recharge your phone on a regular basis by returning the handset to the cradle after each phone call. When
the operating time becomes short, even after the batteries are recharged, please replace the batteries.
A replacement Uniden adapter may be purchase at your local Uniden dealer or by contacting the Uniden Parts
Department (800) 554-3988. Hours are from 8:00 a.m. to 5:00 p.m. CST, Monday through Friday. We can also
be reached on the web at www.uniden.com.
For replacement batteries, use only "AA" rechargeable Ni-MH batteries. Do Not use Alkaline, Lithium, or non-
rechargeable batteries. To insure maximum performance and safety, replacement batteries specifically matched
for this phone, contact www.uniden.com. Using incorrect batteries could damage or limit the performance and
could cause bodily injury.
Specifications, features, and availability of optional accessories are all subject to change without prior notice.
AD-800 for the base
120V AC 60Hz
9V DC 350 mA
BT-211AR
1500 mAh, 1.2V
Up to 7 hours (up to 5 hours when the Clarity Booster is On.)
Up to 14 days (up to 24 hours in DirectLink mode)
A D D I T I O N A L I N F O R M A T I O N
AD-310 for the charger (DCT5260-2 only)
120V AC 60Hz
9V DC 210 mA
[ 53 ]