Table of Contents
Advertisement
Charging the Handset Battery Pack
The Rechargeable Ni-MH Battery Pack must be fully charged before
using your ANA 9320 for the first time.
( Note: Charge the Battery Pack without interruption for 5 hours. )
1. Place the Handset into the
Charging Unit.
2. Make sure the CHARGE indicator
illuminates. If the CHARGE light
doesn't illuminate, check to see
that the AC Adapter is plugged in,
and that the Handset is making
good contact with the Charging
Unit charging contacts.
Low Battery Indicator
When the Battery Pack in the
Handset is low and needs to be
charged, you will see a message
on the display.
On a Call
All keys and functions are available.
Handset beeps once every 3 seconds
Complete your call as quickly as possible
Replace Battery pack within 20 seconds
to continue call.
Return the Handset to the Charging Unit for charging.
Cleaning Charging Unit Contacts
To maintain a good charge, it is important to clean all charging
contacts on the Handset, and Charging Unit about once a month.
Use a pencil eraser or other contact cleaner. Do not use any liquids
or solvents.
In Standby Mode
None of the buttons operate.
Handset beeps every 15 seconds for
3 minutes.
Cannot make call nor receive a call.
Replace Battery Pack before making
a call.
18
Advertisement
Table of Contents
