Viewing And Changing The Priority Status; Scan; Turning Scan On Or Off; Making A Dynamic Priority Change (Conventional Scan Only) - Motorola APX 1000 User Manual

MN000255A01-BL
Chapter 2: Advanced Features
• Use the MFK knob to select another scan list member.
5 Press to exit scan list programming and return to the Home screen.
2.3.5

Viewing and Changing the Priority Status

Procedure:
Perform one of the following actions:
• Press the Menu Select button directly below Sel one or more times to change the priority
status of the current displayed channel.
• Press the Select button one or more times to toggle between different status of the Scan List
status icon of the current displayed channel.
The radio shows one of following priority status icons and scenarios:
• A Scan icon indicates that the current channel is in the scan list as a non-priority channel.
The LED lights up solid green.
• A Priority-One Channel Scan icon indicates that the current channel is in the scan list as
the Priority-One channel. The LED rapidly blinks green. You hear all traffic on the Priority-
One channel, regardless of traffic on non-priority channels.
• A Priority-Two Channel Scan icon indicates that the current channel is in the scan list as
the Priority-Two channel. The LED blinks green.
• No icon indicates that the current channel is deleted from the scan list.
2.4

Scan

This feature allows you to monitor traffic on different channels by scanning a preprogrammed list of
channels.
2.4.1

Turning Scan On or Off

Procedure:
Perform one of the following actions:
• Press the preprogrammed Scan button to toggle Scan On or Scan Off to initiate or stop
scan.
• or to Scan and press the Menu Select button directly below Scan.
If the scan is enabled, the display shows Scan on and the scan status icon.
If the scan is disabled, the display shows Scan Off.
The radio returns to the Home screen.
2.4.2

Making a Dynamic Priority Change (Conventional Scan Only)

When and where to use:
70