MN000255A01-BL
Chapter 2: Advanced Features
4 Press and hold the PTT button to start the Selective Call.
The display shows the ID of the target radio.
5 Release the PTT button to listen.
6 Press
to return to the Home screen.
2.1.2
Talkgroup Call Feature (Conventional Operation Only)
This feature allows you to define a group of conventional system users so that they can share the use
of a conventional channel.
2.1.2.1
Selecting a Talkgroup
Procedure:
1
or to Tgrp and press the Menu Select button directly below Tgrp.
The display shows the last Talkgroup that was selected and stored.
2 Perform one of the following actions:
•
or
to Preset for the preset preprogrammed Talkgroup.
•
or
to the required Talkgroup.
•
Use the keypad to enter the number of the corresponding Talkgroup in the list.
3 Press the Menu Select button directly below Sel to save the currently selected Talkgroup and
return to the Home screen.
4 Press
to return to the Home screen.
2.1.3
Sending a Status Call
When and where to use: This feature allows you to send data calls to the dispatcher about a
predefined status.
Each status can have up to a 14-character name. A maximum of eight status conditions is possible.
NOTICE: The radio automatically exits the feature, if the feature inactivity timer is enabled. You
will hear the Menu Inactive Exit Tone upon feature exit.
Procedure:
1 Perform one of the following actions:
•
Press the preprogrammed Status button.
•
or to Sts and press the Menu Select button directly below Sts.
The display shows the last acknowledged status call, or the first status in the list.
2 Perform one of the following actions:
•
or
to the required status.
58