2.13.10
Editing the Alias of a Waypoint
Prerequisites: Ensure your radio shows the current location on the screen.
Procedure:
1 Press the Menu Select button directly below Optn.
2
or
to Waypoints and press the Menu Select button directly below Sel .
The display shows a list of waypoints.
3
or
to the required saved waypoint, and press the Menu Select button directly below Optn.
4
or
to Edit name and press the Menu Select button directly below Sel .
A blinking cursor appears in the Edit Name screen.
5 Use the keypad to edit the alias.
6 Perform one of the following actions:
•
Press the Menu Select button directly below Ok once you are done.
•
Press the Menu Select button directly below Cncl to return to the Waypoints main screen.
7 The display shows <Waypoint name> Updated and the radio returns to the Waypoints main
screen.
8 Perform one of the following actions:
•
Press the Menu Select button directly below Back to return to the previous screen.
•
Press
, the PTT button, or the preprogrammed GPS button to return to the Home screen.
2.13.11
Editing the Coordinates of a Waypoint
When and where to use:
NOTICE: The user can only edit preprogrammed coordinates of Home and Destination.
Ensure your radio shows the current location on the screen.
Procedure:
1 Press the Menu Select button directly below Optn.
2
or
to Waypoints and press the Menu Select button directly below Sel.
The display shows a list of waypoints.
3 Perform one of the following actions:
•
or
to [Home] and press the Menu Select button directly below Optn.
•
or
to [Destination] and press the Menu Select button directly below Optn.
4
or
to Edit location and press the Menu Select button directly below Sel.
The first number blinks.
5 Utilize the following control buttons to select the number/coordinates if required, then press the
Menu Select button directly below Edit to change the number/coordinates.
•
Press to move to the previous number/coordinates.
MN000255A01-BL
Chapter 2: Advanced Features
99