Note: The exact operation of the Feature Buttons depends on how
your PBX system is configured. Contact your PBX
Administrator for more information.
Placing a call "on hold"
Press hold . You will see the
following display:
To resume the call, press hold or TALK .
Transferring a Call
Press xfer (TRANSFER).
You will see the following display:
The dialed numbers saved in
xfer memory is shown on the
display after 2 seconds.
When the receiving party
answers, press xfer to complete
the transfer.
Connecting a Conference Call
To connect a second party to
a call in progress, press conf
(CONFERENCE). You will see
the following display:
The dialed numbers saved in
conf memory is shown on the
display after 2 seconds.
When the other party answers,
press conf to have a
three-way conversation.
Feature Buttons
26