Installing The Handset Battery Pack - Uniden ANA 9310 Owner's Manual

Installing the Handset Battery Pack

1. Remove the battery cover by
pressing the latch and sliding
the cover down and off of
the Handset.
2. Connect the battery pack
connector observing correct
polarity to the jack inside the
battery compartment.
Do not exert any force on this
connection. It could cause
damage to the battery or
handset. Once you are certain
that you have made a good
connection, then insert the
battery pack into the battery
compartment. Do not pinch
the wires.
3. Place the cover and slide the
cover up until it latches into
the Handset.
18