Transmitting; Lighted Keys And Display; Turning Off And Reactivating The Key Beep - Uniden MHS 350 Owner's Manual

Transmitting

1
Transmission power can be set to either
5W or 1W.
Press the 1/5W/LOCK button to make
the change, then the 5W or the 1W
indicator on the display changes
accordingly.
2 To transmit, press and hold the PTT (push-to-talk) key.
TX appears on the display.
3 To return to receive, release the PTT key.
TX disappears from the display.
• If the PTT key is pressed for more than 5 minutes, TX starts
blinking and the transmission ends. The TX time out tone will
sound until the PTT key is released.
• If the battery indicator level is 0 and the PTT key is pressed, the
radio will not transmit and the TX icon and the channel number
start blinking. (Refer to the description of the Battery Indicator
on the next page.)

Lighted Keys and Display

To light the display, press any key excluding the PTT key.
• If you press any button other than the PTT key while the display
and keypad are illuminated, it remains illuminated for another
5 seconds.

Turning Off and Reactivating the Key Beep

Your radio emits a beep each time one of the buttons (except for
the PTT key) is pressed.
To turn off or reactivate the Key beep:
Turn the radio On again while pressing and holding the L or
M buttons.
19