Huawei UPS5000-E300K-SM Quick Manual page 4

1. This document describes cable routing by removing the top cover when there are two mains
inputs.
2. In the case of single mains, you do not need to connect bypass input power cables and remove
short-circuit copper bars.
3.2
Connecting Cables to the UPS5000-E-300K-SM
1. Open the front door, and remove the cover
from the power distribution subrack.
The cover can be opened only if the
maintenance bypass switch is OFF.
3. Remove the copper bars between mains
input terminals and bypass input terminals.
2. Remove a certain number of small covers
from the cabinet bottom based on site
requirements.
4. Connect the ground cable to the UPS.
•
: Internal equipotential connection
•
: Protection ground
4