Page 1
Z-5160 Advanced Middle-Range CCD Scan Module Service Guide Revision History Changes to the original manual are listed below: Version Date Description of Version Nov. 20, 2011 Initial release Dec. 25 2014 Added cables...
All trademarks mentioned herein, registered or otherwise, are the properties of their various respective owners. This manual is in A4 format. Please check your printer setting before printing it out. Z-5160 Service Guide 2 / 10...
ERVICE UIDE Table of Contents Preface..................................2 Important Notice ..................................2 Table of Contents................................3 Introduction ...................................4 Product Overview...................................4 Components....................................4 Scanner Parts ..................................5 Take Apart ..................................6 Before You Start ..............................6 Important Instructions ..............................6 Tools to Prepare ..................................6 Z-5160 Service Guide 3 / 10...
CCD acts in remarkable performance. Product Overview Components Description Function Exit Window CCD aperture Interface Cable Used to connect to the host Good Read LED Indicates a successful reading Mounting Holes For mounting the device Z-5160 Service Guide 4 / 10...
• Heed all warnings. Tools to Prepare • Philips screwdriver. Please follow these steps to take apart Z-5160. Remove the 4 screws from the back cover. Remove the 4 screws from the front cover. Z-5160 Service Guide 6 / 10...
Page 7
ERVICE UIDE Carefully separate the back cover from the aluminum base. Carefully separate the front cover from the aluminum base. Remove RS232 cable from aluminum base. Z-5160 Service Guide 7 / 10...
Page 8
ERVICE UIDE Remove the main board from the alumni base. Remove the RS-232 cable connector from the main board. Remove the screws from the interval fixed board. Z-5160 Service Guide 8 / 10...
Page 9
ERVICE UIDE Separate the interval fixed board and the USB cable from the main board. 10. Remove the FFC cable from the main board. 11. Remove the screws from the main board. Z-5160 Service Guide 9 / 10...
Page 10
ERVICE UIDE 12. Separate the engine assembly from the main board. Note: To assemble the device, please start from the last step and work your way backwards. Z-5160 Service Guide 10 / 10...