Instant Channel 16 Communications; Australian/International Channels; Weather Channels - Uniden HH979XL Operating Manual

... - -
"-
-
Instant Channel 16 Communications
To access
Instant Channel
16 Communications, press
CH16. This overrides the channel selected with the UP!
DOWN Key or any scanning activity. The Channel Display
will indicate the unit is on
Channel
16.
To deactivate
Instant Channel
16 Communications, Press
CH16 again to release the switch (Off) and the transceiver
will return to the channel selected or previous mode prior to
accessing
Instant Channel
16 communications.
AUSTRALIAN/INTERNATIONAL
Channels
To select operation (communications and scanning) on
International Channels,
press and hold the DW
Switch
for
about 1.5 seconds INT will appear on the LCD Display
indicating
International Channel
Mode.
To select operation (communication and scanning) on
Australian
Channels,
press and hold the DW Switch again
for more than 1.5 seconds. INT will disappear on the LCD
Display indicating Australian
Channel Mode.
On Power
OFF, the change is kept in memory
.
Weather Channels (INT'L MODE ONLY)
To scan the Weather
Channels,
select any Weather
Channel
and then press and hold the UP Switch for
about
1.5 seconds. The SCAN function starts and SCN will appear
on the LCD Display.
DUAL WATCH is automatically ON to cover CH16 when
SCAN Mode is activated. (DW will appear on the LCD
Panel)
If there is too much activity on CH16, and you wish to
exclude it when scanning Weather channels, simply press
DW Switch momentarily to cancel Dual Watch. (DW is no
longer displayed on the LCD
Panel)
To deactivate SCAN, press DOWN Key.
While on Weather Channel (Scanning or Monitoring),
switching back to Australian Channel Mode will reset
HH979XL to CH16 Manual Mode.
Note:
WX (Weather) Service is currently not available in
Australia.
Page 11
HH979XL