Memory Dialling; Storing A Telephone Number Into Memory; Erasing A Stored Telephone Number; Recallingthe Stored Telephone Number - Uniden HH979XL Operating Manual

-
~
-
MEMORY DIALLING
You can store up to 10 telephone numbers into memory
.
Each telephone number can be up to 30 digits long.
STORING A TELEPHONE NUMBER INTO
MEMORY
To store a number into memory. do the following:
.
Press [ST] key. Note that the LCD Display is flashing.
(as shown) ..,~::.
"..,..
. Enter the desired telephone number with the appropriate
STD and IDD Area Codes.
.
Press [ST] Key again.
.
Enter the desired Memory location (choose from 0 to 9).
A confirmation BEEP will sound and the LCD Display
stops flashing.
ERASING A STORED TELEPHONE NUMBER
.
Press [ST] key. Note that the LCD Display is flashing.
.
Press [CL] key.
.
Press [ST] key and the memory location number (0 to
9). A confirmation BEEP will sound and the LCD
Display
stops flashing.
Note: WhilstSTORING and ERASING a telephone
number:
-
If you entered the wrong sequence. an error tone
willsound and the programming mode willend.
- If you have not keyed any digit within 30 seconds,
an error tone willsound and the programming
mode willend.
RECALLINGTHE STORED TELEPHONE
NUMBER
.
Press [RC] Key.
.
Press the required memory location (0 to 9) desired.
.
Press Asterisk [*] Key. Your Seaphone ID and the
stored telephone number will automatically be transmit-
ted.
Note:
When the memory locationis not entered an error
tone willsound and RECALL mode willend.
Should you wish to discontinue memory recall
dialling, j ust press [CL] Key.
---
Page 19
HH979XL