Set Alarm To Radio Mode; Turn The Alarm Off - Uniden Bearcat UBC 248CLT Reference Manual

Set Alarm to Radio Mode

Before you set the Radio Alarm, make sure the AM or FM channel is selected and the
VOLUME control is set to the desired level.
The scanner must be turned off (Clock Mode), to be woken up by the radio alarm.
1. Press OFF.
2. Press and hold ALARM for more
3. The ALARM remains on.
When the alarm goes off, it will play the radio station that was previously selected. The alarm
will continue for approximately 15 minutes, if no action is taken.
Snooze function
To silence the alarm, simply press any key. This silences the alarm for about nine minutes. You
can repeat this cycle for over an hour.

Turn the Alarm Off

Press ALARM to turn the alarm off.
than 2 seconds. When the alarm is
on, the ALARM and RADIO
icons flash for 5 seconds.
When the alarm is off, the ALARM
icon and current alarm time are no
longer displayed, only the current time is
displayed.
30