Table of Contents
Advertisement
Quick Links
Congratulations on your new Aduro Stove!
To get the best possible experience and benefit from your new Aduro Pellet Stove, it is important that you
read the user manual thoroughly before you install the stove and start using it. Errors or incorrect settings
can cause hazardous conditions and/or poor operation.
For further information, please go to www.adurofire.com.
At the back of the stove, you can find the production number and serial number. We recommend that you
note down these numbers in the box below before mounting the stove. For the purposes of the warranty and
for other enquiries, it is important that you are able to quote the production number as well as the serial
number.
Production number:
Serial number:
HOW TO SUCCEED WITH YOUR NEW ADURO STOVE
In our customer service centre
tips and tricks on how to succeed with your new Aduro stove. Here,
you will have direct access to interesting content about installation
and maintenance of your stove as well as support related
information. Find us
here
Enjoy!
Aduro Customer Service
and make the most of your Aduro stove.
Version 1
you will find
EN
Advertisement
Table of Contents
Related Manuals for ADURO P2
Summary of Contents for ADURO P2
- Page 1 Congratulations on your new Aduro Stove! To get the best possible experience and benefit from your new Aduro Pellet Stove, it is important that you read the user manual thoroughly before you install the stove and start using it. Errors or incorrect settings can cause hazardous conditions and/or poor operation.
-
Page 2: Product Safety
The combustion of waste, especially of plastic materials, damages the stove and the flue pipe. Moreover, it is forbidden by the law against the emission of harmful substances. • Use only the fuel recommended by Aduro A/S. It is forbidden to use any liquid fuels and bioethanol fluids for lighting/rekindling pellets. •... -
Page 3: General Safety Precautions
1.3 General safety precautions • Use the stove only as described in this manual. Any other use not recommended by the manufacturer may cause fires or accidents to people. • Make sure that the electrical power available corresponds to the value indicated on the data plate (230V~/50Hz). -
Page 4: Technical Specifications
Under specific circumstances, an uninterrupted power supply unit must be installed. Aduro A/S declines all responsibility for any damage which may be caused, directly or indirectly, to persons, animals, or objects as due to non-compliance with any provision specified in the manual, especially warnings regarding installation, use, and maintenance of the stove. - Page 5 2.1 Transportation When taking your stove home, please ensure that it travels in an upright position. The packaging must be disposed according to national rules regarding disposal of waste.
-
Page 6: Basic Features Of The Stove
3. Basic features of the stove Door Door handle Exhaust outlet Refill drawer Display Brazier Ashpan Top outlet Back outlet 10. Air intake 11. Communication port (RS232) 12. Socket 230V 13. Safety thermostat 14. Room temperature sensor... -
Page 7: Installation Of The Stove
4. Installation of the stove 4.1 Installation You are welcome to install your stove yourself – but we strongly recommend that you consult your chimney sweeper before you begin the installation. It is important to ensure that the installation of the stove is in compliance with all local rules and regulations, including the ones relating to national and European standards. - Page 8 Make sure the stove stands stable, using the four adjustable feet. If stove is to be placed close to flammable material such as a wooden floor or carpet it must be placed on a non-flammable base. The floor plate should extend for at least 30 cm in front of the stove and 15 cm on each side –...
- Page 9 4.3 Flue pipe and chimney The flue pipe is one of the key features for guaranteeing the proper functioning of the stove. • The stove is fitted with a Ø80mm round flue outlet and a joint connection to be connected to the flue pipe.
- Page 10 Read more at aduro.com Excess draft causes an increase in the combustion temperature and consequently a loss in stove efficiency.
- Page 11 5. Display 5.1. Display The display shows basic information about the operation of the stove and has 3 buttons for various settings (see the description below). Room temperature setting LED Auger LED Exchanger LED (inactive) ON/OFF LED Igniter LED Heat output setting LED Button 2: increase/stove Button 3: ON/OFF/confirm/exit status/heat output setting...
-
Page 12: Using The Stove
6. Using the stove Make sure the stove is connected to the power source and the chimney. 6.1 Turning the stove on and off To turn on the stove, press and hold button 3. The ON/OFF LED starts flashing. During the pre-heating phase, the igniter and the exhaust fan start to work, indicated by the respective LED on the display. -
Page 13: Clock Settings
7. Settings In order to access the general programming menu, press and hold button 1. Press button 1 (down) or button 2 (up) to scroll through the menus 1-9. Use button 3 to confirm and enter the chosen menu. 7.1 Clock settings Use this function to set the current time and date. - Page 14 DAILY PROGRAMMING menu level setting meaning available values n2-2-01 DAYLY CHRONO Enable daily chrono ON/OFF n2-2-02 START 1 Day Start time OFF-00:00-23:50 n2-2-03 STOP 1 Day Stop time OFF-00:00-23:50 n2-2-04 Set Pot 1 Heat level 01-05 …C n2-2-05 Set Temp. 1 Wanted room temperature n2-2-06 START 2 Day...
- Page 15 …C n2-3-16 Set Temp. PRG 2 Wanted room temperature n2-3-17 MONDAY ON/OFF n2-3-18 TUESDAY ON/OFF n2-3-19 WEDNESDAY ON/OFF n2-3-20 THURSDAY ON/OFF n2-3-21 FRIDAY ON/OFF n2-3-22 SATURDAY ON/OFF n2-3-23 SUNDAY ON/OFF n2-3-24 START PRG 3 Start time OFF-00:00-23:50 n2-3-25 STOP PRG 3 Stop time OFF-00:00-23:50 n2-3-26...
-
Page 16: Language Settings
WEEKEND PROGRAMMING menu level setting meaning available values n2-4-01 WEEKEND CHRONO Enable weekend chrono ON/OFF n2-4-02 START 1 WEEKEND (SAT) Start time OFF-00:00-23:50 n2-4-03 STOP 1 WEEKEND (SAT) Stop time OFF-00:00-23:50 n2-4-04 Set Pot 1 Heat Level 01-05 …C n2-4-05 Set Temp. -
Page 17: Technical Settings
7.7 Information on the operation of the stove When entering menu 7, you can scroll through a few parameters on the display. The table below contains an example of the values shown on the display together with their meaning. Displayed status (example) meaning 3.1”... - Page 18 8.1 Alarm 1: Power outage When a power outage occurs during the work phase of the stove, there are two ways the stove may react. If the period without power is shorter than the one set in the technician settings, the stove will continue with the working phase once the power is on again.
-
Page 19: Cleaning And Maintenance
Soot and dust can easily be removed using a damp cloth that you dip in cold ash and rub on the sooty glass. Special cleaning agents are also available to remove soot from the glass, e.g. the Aduro Easy Clean pad. -
Page 20: Surface Maintenance
Aduro and our service partners can monitor and adjust stoves in the Aduro Cloud. However, it is only possible if the stove is connected to the cloud via Wi-Fi. Aduro can therefore not treat complaints regarding function and combustion if the stove is not online. - Page 21 The right of complaint does not cover: • Damages resulting from incorrect installation and use of the stove, overheating and wrong or missing maintenance of the stove etc. (including the annual service visit). • Consumable service parts (glass, gaskets, firebricks, handles, painted surfaces, electrical igniter, sensors/switches, cast iron grate), which are subject to normal wear and tear.