Clock Settings; Timer Settings - ADURO P2 Manual

In order to access the general programming menu, press and hold button 1. Press button 1 (down) or button
2 (up) to scroll through the menus 1-9. Use button 3 to confirm and enter the chosen menu.

7.1 Clock settings

Use this function to set the current time and date.
Enter menu 1, then use button 1 or 2 to switch between the weekdays Monday-Sunday. Press button 3 to
confirm and continue to the hour settings.
Change the hour, minute, day, month and year with the buttons 1 and/or 2. Confirm each value by pressing
button 3.

7.2 Timer settings

Make sure that the starting up and shutting down time does not overlap. Be
aware that at least 30 minutes need to pass between the two time periods.
There are three kinds of timer settings:
•
Daily - allows you to define 2 time periods per day.
•
Weekly - allows you to define 4 time periods which can be chosen for all 7 days of the week
individually.
•
Weekend - allows you to define 2 time periods, one that applies for Saturday and one that applies for
Sunday.
7.2.1 How to turn the timer on and off
Enter menu 2, press button 3 to confirm and to enter menu 2-1 (n2-1), then switch between ON and OFF
using button 1 or 2. Confirm your choice with button 3. The stove will only work according to the different
timer settings if the timer is turned ON.
7.2.2 Daily programming
Enter menu 2, then press button 2 to continue to menu 2-2, the daily programming menu. Use button 3 to
scroll through the different settings within this menu in the order shown in the table below (n2-2-01 to n2-2-
09). Use the buttons 1 and 2 to change the respective values.
The daily programming mode must be enabled (n2-2-01 → ON) in order for the stove to work according to
the timer.
7. Settings
13