WEEKEND PROGRAMMING
menu level
n2-4-01
n2-4-02
n2-4-03
n2-4-04
n2-4-05
n2-4-06
n2-4-07
n2-4-08
n2-4-09
7.3 Language settings
Enter the language setting menu by pressing and holding button 1. Press button 2 until you reach menu 3
and confirm with button 3. Scroll through the languages with button 2 and confirm the chosen language with
button 3.
The available languages are listed in the following order: ITA, ENG, FRE, DEU, SPA, POR.
7.4 Stand-by mode
The STAND-BY mode allows the stove to automatically turn off when the measured temperature exceeds
the set room temperature with 2 °C and will turn back on when the measured room temperature is 2 °C
below the set room temperature.
Enter menu 4, then choose ON or OFF by pressing button 1 or 2. Confirm your choice with button 3.
7.5 Sound alerts
The stove will make you aware of any potential alerts with a beep sound.
Enter menu 5, then choose ON or OFF by pressing button 1 or 2. Confirm your choice with button 3.
7.6 Initial pellet loading
Enter menu 6, then press button 2. The exhaust fan will turn on and the auger starts to turn. A 90 seconds
count-down will appear on the display. The initial pellet loading stops automatically after the 90 seconds. If
necessary, it can be stopped before by pressing button 3. This function is available only when the stove is
switched OFF. Upon the first stove start-up the auger tube must be loaded with pellets.
If the pellet container runs completely empty during use, it is necessary to load the auger as described
above. Stop the initial pellet loading as soon as you can hear/see pellets falling into the brazier.
setting
WEEKEND CHRONO
START 1 WEEKEND (SAT)
STOP 1 WEEKEND (SAT)
Set Pot 1
Set Temp. 1
START 2 WEEKEND (SUN)
STOP 2 WEEKEND (SUN)
Set Por 2
Set Temp. 2
meaning
Enable weekend chrono
Start time
Stop time
Heat Level
Wanted room temperature
Start time
Stop time
Heat Level
Wanted room temperature
available values
ON/OFF
OFF-00:00-23:50
OFF-00:00-23:50
01-05
...C
OFF-00:00-23:50
OFF-00:00-23:50
01-05
...C
16