ADURO P2 How-To

Revision date: 21.03.2024
How to change settings on the Aduro P2 display
Difficulty level: Intermediate
Time consumption: 5-15 minutes
Components: Display
NB: All adjustments are recommended to be carried out by a professional craftsman. Any adjustments made
by unauthorized personnel may result in loss of warranty.
All Aduro pellets stoves come with standard settings, which are suitable for most cases. Though to get the
most out of the stove and achieve optimal performance adjustment of the settings is needed.
Adjustment of the settings
Figure of the display - from the manual.
Through the article, the 3 buttons will be referenced by their numbers 1,2 and 3.
Accessing the technical menu:
1. To access the general settings menu, hold button 1 until the display changes to show "M1" followed
by text.
2. Use buttons 1 / 2 to navigate to the menu "M8", and press button 3 to access the menu.
3. An access key is needed to access the more complex settings in this menu point. The access key is
"A9". Use buttons 1 / 2 to navigate until the correct key is shown in the display press button 3 to
enter.
4. The technical settings menus are now available. The first menu "M8-1" contains most of the settings
needed to adjust the performance of the pellets stove. Press button 3 to enter this menu.
Adjusting settings in the technical menu
The following document shows the standard settings of the P2 stove: