2.1 GUI Introduction
• Click
to start/stop auto-switch. The screen will automatically switch to the next one.
• Right click a camera, or click
• Double click a camera to view it in single-screen mode. Double click again to exit single-screen
mode.
• Change a camera live view screen by dragging it from its screen to the desired screen.
• Scroll up/down to turn to previous/next screen.
• Position the cursor on a camera to show shortcut menu.
Button
• In the live view interface, there are icons at the upper-right corner of the screen for each
camera, showing the camera recording and alarm status.
Icon
• Right click your mouse to display the shortcut menu.
Network Video Recorder User Manual
Chapter 2 Live View
to enter full screen mode.
Figure 2-1 Shortcut Menu
Table 2-1 Shortcut Menu Description
Start playing videos recorded in the latest five minutes.
Digital zoom. You can adjust zoom-in times and view the desired area.
Click it to enter PTZ control mode.
Turn on/ o ff live view audio.
Switch video stream.
Table 2-2 Live View Icon Description
Alarming (normal event and smart event).
Recording.
Description
Description
5