HIKVISION DS-7100NI-Q1 Series User Manual page 81

Network Video Recorder User Manual
Before You Start
Install at least an HDD to your video recorder.
Steps
1. Go to Configuration → Record → Storage .
2. Select an HDD.
3. Click Init.
Add Network Disk
You can add the allocated NAS or IP SAN disk to the video recorder, and use it as a network HDD.
Up to 8 network disks can be added.
Steps
1. Go to Configuration → Record → Storage .
2. Click Add.
3. Set NetHDD.
4. Set Type as NAS or IPSAN.
5. Enter NetHDD IP address.
6. Click to search the available disks.
Figure 6-26 Add NetHDD
7. Select NAS disk from the list, or manually enter the directory in NetHDD Directory.
8. Click OK.
Result
The added NetHDD will be displayed in the storage device list.
67