Chapter 7 Maintenance; Restore Default; Search Log; System Service - HIKVISION DS-7100NI-Q1 Series User Manual

7.1 Restore Default

Steps
1. Go to Maintenance .
2. Select the restoring type.
Simple Restore
Restore all parameters, except the network (including IP address, subnet mask, gateway,
MTU, NIC working mode, default route, server port, etc.) and user account parameters, to
the factory default settings.
Factory Defaults
Restore all parameters to the factory default settings.
Restore to Inactive
Restore the device to the inactive status, and leave all settings unchanged except restoring
user accounts.
3. Click Yes. The device will reboot automatically.

7.2 Search Log

The operation, alarm, exception and information of video recorder can be stored in logs, which can
be viewed and exported at any time.
Steps
1. Go to Maintenance.
2. Click More.
3. Go to Log Information.
4. Set the search conditions.
5. Click Search.

7.3 System Service

Steps
1. Go to Maintenance .
2. Click More.
3. Go to System Service → System Service .
4. Configure the parameters as your desire.
RTSP
You can specifically secure the stream data of live view by setting the RTSP authentication.
Network Video Recorder User Manual

Chapter 7 Maintenance

70