Standard Equipment; Han Dlin G The Machin E; In Stalling San Dpaper - Virutex LRT84H Operating Instructions Manual

3. STAN DARD EQUIPMEN T
Inside the box you will find the following:
LR T84H MODEL
- LR T84H orbital/rotaryorbital sander with electronic
speed adjustment.
- Allen service key e/c: 4 mm.
- Mobile base sander set with Velcro delta pad 8446420.
- Velcro rotaryorbital base 8445200
- Suction bag set
- Instruction manual and other documentation
- 1 abrasive sheet for mobile base
- 2 Velcro abrasive sheets for Delta base
- 1 Velcro abrasive disk
LR E 84H MODEL
- LR E 84H orbital sander with electronic speed adjustment
- Allen service key e/c: 4 mm.
- Mobile base sander set with Velcro delta pad 8446420.
- Suction bag set
- Instruction manual and other documentation
- 1 abrasive sheet for mobile base
- 3 Velcro abrasive sheets for Delta base
LR 84H MODE L
- LR 84H orbital sander machine without electronic
speed adjustment.
- Allen service key e/c: 4 mm.
- Mobile base sander set with Velcro delta pad 8446420.
- Suction bag set
- Instruction manual and other documentation
- 1 abrasive sheet for mobile base
- 3 Velcro abrasive sheets for Delta base
4. ACCESSORIES
- Mobile base 8402434
- Delta Velcro mobile base 8445198
- Mobile base sander set with Velcro delta pad 8446420.
Optional:
- Velcro R otaryorbital Base Plate 8445200 (Included
with model LRT 84H)
- Velcro adaptor 8499211
- LR84H centring and abrasive drilling device 8445232
- Standard dust collection attachment 6446073 3.5 m
- Standard dust collection attachment 1746245 5 m
5. SAFETY IN STRUCTION S FOR

HAN DLIN G THE MACHIN E

2. T he voltage must correspond to the data indicated
on the feature plate.
3. Danger! Keep hands away from working area. Do not
hold the machine from underneath while it is running.
4. It is advisable to use only original VIR UTE X abrasives.
5. Inspect wood and remove any nails before sanding.
6. Never use the sanding machine in the presence of
liquids or excessive humidity.
7. Never leave an electric tool before all moving parts
have come to a complete stop.
8. The dust that accumulates during the sanding process
may prove to be toxic or harmful to the health (for
example, in the case of lead-based paints, certain woods
or metals). Use the dust collector connection at all times.
9. RE PLACE ME NT PART S: Use only original replacement
parts.
6. STARTING THE MACHIN E AN D
ELECTRON IC ADJUSTMEN T
T o start the machine, move switch "B" to the right.
T o adjust the speed electronically in models LRT 84H
and LRE 84H, turn button "A" to the desired working
speed (Fig. 1).
7. MOUN TIN G THE BASE PLATES
MOBILE BASE SANDE R SE T WIT H VE LCRO DE LT A PAD
8446420
VELCR O MOBILE BASE 8445189
T o assemble the mobile base sander set with Velcro delta
pad ref. 8446420, first remove screw "F" and washer "G"
using service key "H" (Fig. 2). Next, remove the aluminium
base, along with pad "D", which is fitted (Fig. 2), and
attach the mobile base sander set with the Velcro delta
pad, using screw "F" and washer "G", as shown in (Fig. 3).
When the machine is fitted with the rotary orbital
base plate, follow the same procedure to assemble any
of the pads.
T o attach the mobile base with Velcro accessory ref.
8445189, remove screws "C" (Fig. 2), remove standard
sanding pad "D" and attach the pad with the Velcro
accessory using screws "C".
VELCR O ROTARYORBIT AL BASE 8445200
T o attach this accessory, first remove screw "F" and
washer "G" using the service key "H" (Fig. 3). Remove
the aluminium base along with base "D" or "E " (Fig. 2
and 3), whichever is installed at the time, and insert
base "I" (Fig. 5), centring it using drag "J" (Fig. 4) and
securing it in place with screw "F" and washer "G" as
dicated in (Fig. 5).
o install one of these bases when the machine is equipped
ith the rotaryorbital plate, the procedure is the same.

. IN STALLING SAN DPAPER