Virutex LRT84H Operating Instructions Manual page 7

ENGLI SH
ORB I TA L SA N DER
L R8 4 H/L RE8 4 H/L RT 8 4 H
Important
1. TECHN ICAL DATA
MODE L LR84H
Machine Type..................................ORBITAL SANDER
Universal Motor...............................................50-60 Hz
Power..................................................................180 W
No-load speed...........................................12500 min
St roks.................................................................25000
Orbit diameter.......................................................2 mm
Sanding surface..........................................130x80 mm
Weight................................................................1.5 Kg
Weighted equivalent continuous
acoustic pressure level A..................................................77 dBA
Uncertainty...................................................................K = 3 dbA
Wear ear protection!
Vibration total values.................................................a
Uncertainty....................................................................K: 1.5 m/s
MODE L LRE 84H
Machine Type..........ELECTRONIC ORBITAL SANDER
Universal Motor...............................................50-60 Hz
Power..................................................................180 W
Adjustable speed..............................7000-12500 min
St roks......................................................14000- 25000
Orbit diamet er......................................................2 mm
Sanding surf ace.........................................130x80 mm
Weight................................................................1.5 Kg
Weighted equivalent continuous
acoustic pressure level A..................................................77 dBA
Uncertainty...................................................................K = 3 dbA
Wear ear protection!
Vibration total values.................................................a
Uncertainty....................................................................K: 1.5 m/s
MODE L LRT 84H
Machine Type..............ELECTRONIC ORBITAL AND
Universal Motor...............................................50-60 Hz
Power..................................................................180 W
Adjustable speed..............................7000-12500 min
St roks......................................................14000- 25000
rbit diameter.......................................................2 mm
anding surface..........................................130x80 mm
brasive disk diameter.......................................125 mm
Weight ................................................................1.5 Kg
Weighted equivalent continuous
coustic pressure level A..................................................77 dBA
ncertainty...................................................................K = 3 dbA
Wear ear protection!
Vibration total values.................................................a
Uncertainty....................................................................K: 1.5 m/s
2. USES
ORBIT AL S ANDING MAC HINE : A single-handed sander for
dry surface finishing. E quipped with forced suctioning
- 1
of sanding dust.
T o obtain a good quality finish, slide the machine over the
surface to be worked in repetitive elliptical movements
to avoid the formation of grooves on the sanded surface.
T o achieve the desired finish, the surface should be sanded
several times using a finer grain of abrasive each time.
With the delta base 84.45.198 included with the machine,
even difficult to reach inside corners and slatted shutter
can easily be sanded.
T he electronic speed adjustment feature included in
models LR E 84H and LR T84H allows you to work at the
: 3.6 m/s 2
ideal speed for each abrasive and surface type. This is
h
2
particularly useful for sanding heat-sensitive materials
which require lower sanding speeds.
ROT ARYORBITAL SANDE R: The single-handed rotar-
yorbital sander combines two types of movement, one
rotational and the other orbital, enabling it to perform
planing and finish work very quickly. T he smooth, sanded,
- 1
groove-free surfaces produced make it ideal for delicate
jobs and varnished wood.
E quipped with forced suctioning of sanding dust. T he
double sander LRT 84H is factory equipped with a velcro
base plate 8445200, which enables it to be converted
into a rotaryorbital sander.
T he orbital sanders, LR84H and LRE 84H, can also be
converted into rotaryorbital sanders by purchasing the
velcro base plate 8445200 as an accessory.
Models LR E 84H and LRT 84H are equipped with electronic
speed adjustment devices which allow you to work at
the ideal speed for each surface and abrasive type. This
2
: 3.6 m/s
h
is particularly useful for sanding heat-sensitive materials
2
which require lower sanding speeds.
ROT AR YORBIT AL SANDE R
-1
2
: 3.8 m/s
h
2