Linking Trays; Two‑Sided Printing - Lexmark MX822 User Manual

Loading paper and specialty media
•
When loading prepunched paper, make sure that the holes on the long edge of the paper are against
the right side of the paper guide.
•
Load envelopes with the flap side down and against the left side of the paper guide.
Warning—Potential Damage: Do not use envelopes with stamps, clasps, snaps, windows, coated
linings, or self‑stick adhesives.
5
From the control panel, set the paper size and paper type to match the paper loaded.

Linking trays

1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > Paper > Tray Configuration.
3
Set the same paper size and paper type for the trays that you are linking.
4
Save the settings.
5
Click Settings > Device > Maintenance > Configuration Menu > Tray Configuration.
6
Set Tray Linking to Automatic.
7
Save the settings.
To unlink trays, make sure that no trays have the same paper size and paper type settings.
Warning—Potential Damage: The temperature of the fuser varies according to the specified paper type. To
avoid printing issues, match the paper type setting in the printer with the paper loaded in the tray.
Without an optional staple finisher With an optional staple finisher
Two‑sided printing
One‑sided printing
Two‑sided printing
Two‑sided printing
35