Bosch 0 986 610 825 Product Description page 21

8. Decommissioning
8.1 Change of location
¶
If the 0 986 610 825 is passed on, all the documenta-
tion included in the scope of delivery must be handed
over together with the unit.
¶
The 0 986 610 825 is only ever to be transported in
the original or equivalent packaging.
¶
Unplug the electrical connection.
¶
Heed the notes on initial commissioning.
8.2 Disposal and scrapping
8.2.1 Substances hazardous to water
!
Oils and greases as well as refuse containing oil and
grease (e.g. filters) represent a hazard to water.
1. Substances hazardous to water must not be allowed
to enter the sewage system.
2. Substances hazardous to water must be disposed of
in accordance with the applicable regulations.
i
Test oil as per ISO 4113 is classified under used oil
collection category 1. In category 1, the used oil
must not contain any foreign substances such as
used oils of a different category, gasoline or diesel
fuel. The corresponding refuse code number can be
taken from the safety data sheet of the test oil.
8.2.2 0 986 610 825 and accessories
The 0 986 610 825 is subject to the Europe-
an directive 2002/96/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
¶
Make use of the local return and collection
systems for disposal.
¶
Proper disposal of 0 986 610 825 prevents
environmental pollution and possible
health hazards.
Robert Bosch GmbH
Decommissioning | 0 986 610 825 | 21
9. Technical Data
9.1 Dimensions and weights
Function
Maximum weight
of tool case approx.
Tool case dimensions
R Length, approx.
R Width, approx.
R Height, approx.
Maximum weight
of mounting device approx.
9.2 Mounting unit 0 986 610 897
Function
Sound pressure level at 5 bar,
at distance of 1 m
Compressed-air supply; from
workshop
Min.
Max.
Compressed-air maintenance
unit; from workshop
Water separator
Filter quality / filter pore size
9.3 Digital dial gauge 0 986 613 422
Function
Measurement range
Increment
Repeatability
Clamping shaft diameter
en
Specification
4.5 kg
400 mm
350 mm
100 mm
24 kg
Specification
=< 70 dB(A)
5.0 bar
5.5 bar
present
0.01 μm
Specification
25 mm
0.001 mm
0.002 mm
8h6
|
1 689 989 245 2015-04-28