Bosch 0 986 610 825 Product Description page 14

en 14 | 0 986 610 825 | Symbols used
1. Symbols used
1.1 In the documentation
1.1.1 Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning KEY WORD – Nature and source of hazard!
symbol
Consequences of hazard in the event of fail-
ure to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-obser-
vance:
Key word Probability of
occurrence
DANGER Immediate impend-
ing danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2 Symbols in this documentation
Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible inter-

result mediate result.
Final result There is a visible final result on com-
"
pletion of the instruction.
1.2 On the product
!
Observe all warning notices on products and ensure
they remain legible.
|
1 689 989 245 2015-04-28
Severity of danger if in-
structions not observed
Death or severe injury
Death or severe injury
Minor injury
2. User instructions
2.1 Important Information
Important information on use of the components can
be found in the separate ESI[tronic] repair manual
"Unit injectors for passenger cars (UI-P)" in the sections
"Safety instructions", "Maintenance instructions" and
"Lubricants and consumables". These must be carefully
studied prior to commissioning, connection and opera-
tion and must always be heeded.
2.2 Safety Instructions
Safety instructions can be found in the separate ES-
I[tronic] repair manual "Unit injectors for passenger
cars(UI-P)" in the section "Safety instructions". These
must be carefully studied prior to commissioning, con-
nection and operation and must always be heeded.
2.3 Intended use
The devices and components in repair kit
0 986 610 825 are intended solely for repair of "Unit
injectors for passenger cars" belonging to generations
(called UI-P in the following).
UI-P 1.x and UI-P 2
!
Non-observance can lead to accidents and damage
2.4 Prerequisites
The user already has the necessary tools (e.g. mounting
device 0 986 613 400), ESI[tronic] information type "K",
diesel test bench EPS 815 with CAM 847 and experi-
ence in testing and repair of UI-P (see section 2.5).
2.5 Training
Testing and repairs of UI-P may be performed only by
qualified and trained personnel. We recommend user
training in testing and repair at the the AA training center.
Robert Bosch GmbH