Makita GA7060 Technical Information page 9

5-2 Large spiral bevel gear, Ball bearing 608ZZ/ 6905DDW for models GA7060, GA9060, GA7060R, GA9060R
5-2-1 Disassembling
Fig. 5-2-1-1
[1] Remove Ball bearing 608ZZ with 1R269.
Ball bearing 608ZZ
Fig. 5-2-1-3
[3] Put 1R032 on the step of Spindle complete.
Tap 1R032 carefully with the ram of an Arbor press
until the press-fitting between Spindle complete and
Large spiral bevel gear is loosened.
Note: Avoid the projection of Bearing box
(Refer to Fig. 5-1-1-16 in the previous page.)
Fig. 5-2-1-4
[4] Press down Spindle complete with 1R286.
1R286
Spindle
complete
Fig. 5-2-1-2
[2] Remove Ring spring 13 with 1R003, 1R212-A and 1R212-B.
1R269
Step of Spindle complete
(See the step [3].)
Ram of Arbor press
1R032
Arbor press table
9 / 25
Ring spring 13
Fig. 5-2-1-5
[5] Large spiral bevel gear, Bearing box portion
and Spindle complete are removed.
Bearing box portion
Spindle complete
1R212-A 1R212-B
1R003
Large spiral bevel gear