Makita GA7060 Technical Information page 17

5-3 Large spiral bevel gear, Ball bearing 608ZZ/ 6905LLB / 6203DDW, SJS-II components for models GA7061,
GA9061, GA7061R, GA9061R (cont.)
5-3-2 Assembling (cont.)
Fig. 5-3-2-7
[6] Set Bearing retainer 59 in place by
tightening Three M4x16 Pan head
screws.
Bearing retainer 59
M4x16 Pan head
screw (3 pcs.)
Fig. 5-3-2-10
[9] Receive Spindle complete with 1R030.
then press-fit the spindle into Joint sleeve with 1R029.
Fig. 5-3-2-11
[10] Set C type plate 29 in place.
Fig. 5-3-2-8
[7] Receive Spindle complete with 1R030.
then press-fit the spindle into Large
spiral bevel gear with 1R029.
1R031
Joint sleeve
Note: Joint sleeve must be placed
as shown above..
1R030
17 / 25
Fig. 5-3-2-9
1R029
Spindle complete
Large spiral bevel
gear
1R030
Fig. 5-3-2-12
[11] Set C type plate 33 in place.
[8] Set O-ring 19 in place.
Note: According to Fig.4-2 in
page 5, apply the specific
lubricants in advance.
C type plate 29
C type plate 33