Makita GA7060 Technical Information page 8

5-1 Armature, Ball bearing 6301DDW/ 6200DDW, Small spiral bevel gear (cont.)
5-1-1 Disassembling (cont.)
Fig. 5-1-1-12
[13] Remove Ball bearing 6301DDW with 1R131.
Ball bearing 6301DDW
Fig. 5-1-1-14
[15] Remove Diffuser by passing 1R015 or like through a bent of Gear housing complete then pushing it out to the opposite.
1R131
Diffuser
Vent of Gear housing complete
5-1 Armature, Ball bearing 6301DDW/ 6200DDW, Small spiral bevel gear (cont.)
5-1-2 Assembling
Asseemble the components by reversing the disassembly procedure.
Also, refer the following points.
Fig. 5-1-1-15
Face the indication of Parts No. for Diffuser toward Gear housing complete,
and fit Diffuser into Gear housing complete.
Indication of Parts
No. for Diffuser
Fig. 5-1-1-13
[14] Hook the jaws of 1R269 to Ball bearing 6200DW.
1R131
Gear housing
complete
8 / 25
While holding the jaws with water pump pliers, remove
the ball bearing.
Ball bearing 6301DDW
Fig.5-1-1-16
Be careful about the directions of Bearing box ,
Gear housing complete and Motor housing
Projection of
Bearing box
Direction of
Makita logo
on Motor housing
1R269
Water pump pliers
Diffuser
Switch