5-8
Wiring diagram
GA7060/GA7061 /GA9060 / GA9061.
Fig.5-8-1.
Set Field ass'y in place of Motor housing in the direction shown below.
Field lead wires
Field
Fig.5-8-2
Fix the lead wire of Power supply cord in each groove of Switch.
Power supply cord
Rib A
Fix the lead wire of Power supply cord in between
Rib A and Switch.
Field lead wires
Noise suppressor (if used)
Switch
Switch
Pass Field lead wires through this hole of
Motor housing.
Do not slacken them in Motor housing.
Motor housing
Receptacle sleeve
Rib B
22 / 25