Storing The Appliance; Servicing The Appliance - Russell Hobbs RHFS02 Instructions And Warranty


Do not use bleach or other abrasive substance or solvents to clean your appliance
as it can be damaging to the finish.

Do not immerse the slicer in water or any other liquid, or hold it under a running tap
to clean.

To remove stubborn spots/marks, wipe the surfaces with a cloth slightly dampened in
soapy water or mild non-abrasive cleaner. Rinse and dry a clean, dry, soft cloth.

The motor is permanently lubricated, and does not require oil.

Danger of injury: The cutting blade is very sharp!

It is necessary to clean the slicer at regular intervals as perishable food scraps could
accumulate on the slicer and cutting blade.

Remove the food grip and clean it in warm, soapy water. (DO NOT CLEAN USING A
DISHWASHER!) Wipe the housing and feed table using a slightly damp cloth. Do not
use any cleaning powders, scouring pads or hard brushes.

Wipe the feed table using a slightly damp cloth. Do not use any cleaning powders,
scouring pads or hard brushes.

STORING THE APPLIANCE


Unplug the unit from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.

Store the appliance in its box or in a clean, dry place.

Never store the appliance while it is still wet or dirty.

Never wrap the power cord around the appliance.

Replace the orange blade 'saver' on to the blade.

SERVICING THE APPLIANCE

There are no user serviceable parts in this appliance. If the unit is not operating
correctly, please check the following:

You have followed the instructions correctly

That the unit has been wired correctly and that the wall socket is switched on.

That the mains power supply is ON.

That the plug is firmly in the mains socket.
9