Cleaning And Maintenance; Storing The Appliance - Russell Hobbs RHTM2 Instructions & Warranty

Treat maker
Table of Contents

Advertisement

CLEANING AND MAINTENANCE

After use, wait for the unit to cool properly before cleaning and storage.
Wipe the inside and edges of the heating plate with a slightly damp paper towel or a soft
cloth.
This appliance is for household use only and is not user-serviceable.
Do not open or change any parts by yourself. Please refer to a qualified electrical service
department or return to the supplier if servicing is necessary.
Always remember to unplug the unit from the electrical outlet when not in use and before
cleaning.
The body of the appliance should be cleaned with a damp cloth. Do not let water enter the
appliance.
Do not use bleach or other abrasive substances or solvents to clean your appliance as it
can be damaging to the finish.
Use a paper towel with a dab of cooking oil to remove stubborn stains.
At the places where the top and bottom plates make contact, the non-stick surfaces may
show signs of wear. This is purely cosmetic, and will not affect the operation of the Treat
Maker.

STORING THE APPLIANCE

Unplug the unit from the wall outlet and clean all the parts as instructed above. Ensure that
all parts are dry before storing.
Store the appliance in its box or in a clean, dry place.
Never store the appliance while it is still wet or dirty.
Use the base cord wrap for neat storage.
The unit can be stored vertically. Ensure the lid lock is securely closed before standing
vertically.
6

Advertisement

Table of Contents
loading

Table of Contents